Assembly Instructions for Wardrobes

At House of Perfection, we provide clear and easy assembly instructions with every wardrobe so you can set up your furniture quickly and confidently. Whether you’ve ordered a sliding wardrobe, hinged door wardrobe, or modular storage unit, our step‑by‑step guidance makes assembly simple — even if it’s your first time.

📦 What’s Included in the Box

Each wardrobe purchase includes:

Printed instruction manual with numbered steps
Labelled hardware packs (screws, bolts, dowels, fittings)
All necessary fasteners and fittings
Basic tools such as Allen keys (where required)
High‑quality boards, rails, doors, and shelving components

You may use extra tools such as a Phillips/flathead screwdriver, rubber mallet, or electric drill with screwdriver bits for faster assembly (optional).

🛠️ Step‑by‑Step Wardrobe Assembly Guide

1. Prepare Your Space

Clear a flat, open area near where the wardrobe will stand. This gives you room to lay out parts and assemble the wardrobe without obstruction.

2. Unpack and Sort Parts

Lay all wardrobe panels, rails, and hardware on the floor.
Match each piece with the list in the manual.
Keep screws and fittings separated in groups as shown in the diagram.

3. Build the Main Frame

Start by connecting the side panels to the base panel.
Make sure edges line up properly before inserting bolts.
Secure loosely first — this allows minor adjustments before final tightening.

4. Attach Vertical Support & Top Panel

Fix the top panel and any central dividers next.
Ensure vertical supports are perfectly upright so doors align correctly later.

5. Install Hanging Rails & Shelves

Place hanging rails into position (usually clipped or screwed into pre‑drilled holes).
Insert shelves and secure them with shelf supports.
Double‑check that shelf pins are level before placing heavy items.

6. Fit Doors (Hinged or Sliding)

Hinged Doors:

Align hinges with pre‑drilled holes on the side panel.
Screw hinges loosely first, then adjust alignment so doors hang straight.
Tighten fully once aligned.

Sliding Doors:

Install top and bottom tracks first.
Lift the door panel into the top track and slide it down into the bottom guide.
Adjust rollers or guides to ensure smooth sliding motion.

7. Secure Back Panel

Gently nail or screw the back panel to the frame to add stability.
Make sure the wardrobe is square (corners at right angles) before fixing fully.

8. Final Tightening & Alignment

Go back and fully tighten all bolts and screws.
Check levels with a spirit level if available.
Ensure doors open and close smoothly.

⚠️ Safety Tips & Best Practices

Assemble with a Partner: Some wardrobes are heavy and wide — two people make it safer and easier.
Protect Your Floor: Use a soft blanket or cardboard underneath to prevent scratches.
Check Hardware Carefully: Installing wrong screws can damage panels — follow the part numbers closely.
Re‑Tighten After Use: After a few weeks of use, check and re‑tighten screws if necessary for longevity.

📄 Downloadable Guides & Support

If you’d prefer a PDF version or a video walkthrough for your specific wardrobe model, just contact our support team. We’re happy to send extra materials or assist via live chat or email if you get stuck during assembly.

With these instructions, wardrobe assembly becomes straightforward and stress‑free. Enjoy your new storage solution from House of Perfection!